Skip to the beginning of the images gallery

DKS DoorKing 9000-385 1 Hp Slide Gate Operator

$2,776.00

(2) MONITORED SAFETY DEVICES REQUIRED

The 9000 includes a 1 Hp motor - 1500 lbs. max. weight / 35 ft. max. width

Availability: In stock

The model 9000 slide gate operator is designed to operate vehicular sliding gates in residential, commercial, and industrial applications. The operator has a full feature circuit board and includes 20-feet of #40 chain. Secondary operators are used in bi-parting (dual) gate applications and are commanded from and powered from the primary operator. Secondary operators cannot be used as a stand-alone device. Warranty: 5 years limited.

Features:

Steel frame provides strength and quiet operation
“T-Handle” release is easily accessible from front of operator
Operator re-connects automatically when handle is released
Adjustable partial open limit
Direct driven limit nuts for precise gate control
Auto-close timer 1-30 seconds
Ports for plug-in open and reverse loop detectors – DKS detectors only
Selectable loop/reverse input function; stop or reverse
Anti-tailgating feature helps to control un-authorized traffic
Standard normally closed stop circuit
Gate Tracker reporting output provides operator data to DKS access control system
Convenience outlets for accessory transformers
Built-in power switch and alarm reset switch
Simple bi-parting gate interface

Specifications:

Maximum gate width 35-ft.

Maximum gate weight 1000 pounds* (1/2 HP) or 1500 pounds* (1 HP). (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)

1/2 or 1 HP continuous-duty motor

115, 230*, 208*, 460* VAC. (*230, 208, and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)

Class I, II, III and IV applications

Compliant with UL 325 and 991, ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or Type B2 entrapment protection devices are required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)

Dimensions: 18.375"W x 31.675"H x 23.25"D

Options:

Plug-in loop detectors.

Heater kit for cold environments.

Secondary entrapment prevention devices.

Bi‐parting gate connection cable.

Gate operator control stations

Postal and Fire Dept lock boxes

Surge suppressors, time clocks, traffic signal.

More Information