Seco-Larm SK-3133-PPQ Keypad

Heavy-Duty Outdoor Access Control Keypad with Proximity Reader Built-in proximity reader. 125kHz(EM125) 4 Available programmable access modes for all 3 outputs: card only, code only, card and common user code, card and unique user code 1,200 Users over 3 Outputs. Codes may be 4~8 digits: Output #1 – Form C relay, 5A@24VDC, 1,000 users Output #2 – Form C relay, 1A@24VDC, 100 users Output #3 – Form C relay, 1A@24VDC, 100 users Outputs can be programmed to activate for up to 99,999 seconds (nearly 28 hours) or toggle Super user code gives admin access to keypad Up to 50 possible temporary visitor codes, programmable for one-time or limited-time use (1~99 hours)  Programmable egress input with optional warning alarm and delayed egress Real-time clock to auto-disable access at specific times 50 duress codes for output #1, 10 for outputs #2 and #3 Duress code signals a silent alarm if an authorized user is forced to open the door under duress All features are programmed directly from the keypad: No need for an external programmer Vandal resistant – for wall, post, or gooseneck mounting Tamper output: N.C. Dry contact, 50mA@24VDC max. Keypad illuminates when a button is pressed; backlight can be programmed for FULL (Dim in standby) or AUTO (OFF in standby) mode Mantrap: for a protected area with two doors, this feature allows only one door to be open at a time or sensor input for anti-tailgating operation Door-propped-open and Door-forced-open warnings EEPROM Memory preserves data in case of power loss