MAX 1200 FS PRO Slide Gate Operator

The Max 1200 FS PRO sliding gate operator is a robotic DSP controlled machine that is perfect for use in high traffic gated communities, commercial/industrial applications and public storage facilities. It is capable of moving 1200 lb. gates to a maximum gate length of 25 ft., gate speed 12″ per second for class I, II, III and IV.

Mechanical Specifications

Max 1200 FS PRO Slide Gate Operator dimensions (14.5” W x 19” D x 25.5” H) 7.5” chain height
Heavy duty direct drive gear box Size 50, 20: 1 gear ratio
Max 1200 FS PRO capacity 1200lbs /25ft long gate speed 12” per second for class I II, III and IV
Independent Opening and Closing speed control for primary and secondary
Direct gear drive (no internal chains, belts, or pulleys)
Corrosion protection gold zinc coating and electrostatic powder coating applied
Continuous cycle at extreme temperature ranges—overheating not possible
Intelligent ramp-up and ramp-down for smooth operation
Selectable short or long ramp-down
Shipping weight of Max Slide Gate Operator: Max 1200 FS PRO (152 lbs)
Programmable virtual OPEN & CLOSE limit (Limits auto-set in the event of a total power loss)

Electrical Specifications

Mechanical Release: Local switch, keypad, or any dry contact relay will release dynamic braking, allowing gate to be pushed back in case of emergency
Brushless DC motor equivalent to 1 1/4 HP AC motor
Programmable gate speed controls, 16 selectable speeds
Automatic gate position reset requires optional magnets and sensors or when using virtual limits, positive stops on both gate directions
Modular system design for ease of service
Switchable 115/230 voltage selection
Adaptive DSP control for advanced brushless DC motion control
Real time performance analyzer and event log (OBD PORT and Black Box) 8000 events including the history of error failure
LCD display that report past and recent errors
Low voltage wiring capabilities for remote power up 500 ft (no battery needed)
‘Solar Ready’ battery module with built-in advanced solar regulator
Intelligent power management system with energy saver mode
Built-in 12vdc and 24vdc outputs
Gold contact input connections and automobile grade connectors
Selectable open timer 0 to 60 seconds with ‘timer off’ option
-4F to 165F (-20C to +74C) operational temperature range including battery performance without needing a heater
Robust lightning protection up to 20KVolts and 10KAmps on all inputs and outputs (44 channels) including loop detector input connections
“Motor overcurrent safety shut off for additional protection
“This operator includes a battery backup module providing on average 200 cycles in case of power failure
Three modes of selectable battery backup functions
State machine design electronics with ultra-fast microprocessor
On-board three button station

Security Specifications

High traffic intuitive loop management system for better security
Advanced security features with built-in audible and remote alarms
Magnetic lock control relay outputs with selectable delay times
Tamper-alert relay output triggers “on” if gate is forced open
Audible alarm if gate is tampered with or ERD is triggered for higher security
Gate partial open recorder. Programmable inputs allow partial open cycles for high traffic gates while providing complete open cycles for emergency vehicles
Lockable cover with key lock release to prevent intruders and vandalism
Built-in transaction buffer for high security 8000 events as well as error messaging file
Gate status outputs for gate monitoring
Advanced anti-tailgate feature provides higher security
Optional Chain Drop Sensor detects unauthorized chain drops when using magnets option
Fire Department Compliance allows gate to auto-open upon loss of AC power or battery depletion

Safety Specifications

Adaptive obstruction sensor for much better gate safety system. 16 selectable sensitivity settings
UL 325/991 compliant Class I, II, III, and IV. CSA approved
Dynamic magnetic brake system stops the gate immediately to prevent damage to obstructions.
Built-in advanced entrapment protection and alarm output
Built-in gate-in-motion alarm for industrial applications
Optional normally close or 10K safety inputs (most safety inputs in the industry)

WILL ONLY WORK WITH MAXIMUM CONTROLS PRODUCTS

Weight	152.000000
Motor Size	1 1/2 + Hp
Max Gate Width (ft)	25
Duty Type	Residential/Commercial, Commercial, Commercial/Industrial
Manufacturer	Maximum Controls
Max Gate Weight (ft)	1,200