LiftMaster CSL24UL 24VDC Slide Gate Operator

The Liftmaster CSL24UL supports gates that do not exceed 50 ft and 1500 lbs. It also supports sites that require 115V/230V 1ph, or solar power 60 Watts (MAX).

The Liftmaster CSL24UL uses Security+ 2.0™ radio technology that has twice the range of standard radio technology. It also features MyQ® Technology, providing the ability to remotely monitor and activate the gate via Internet-enabled mobile phones and computers.

The Liftmaster CSL24UL has a 5 year warranty on commercial applications. This model is 2018 UL325 compliant for class I,II,III, IV.

• Meets the 2018 UL325 Standard with the built in inherent reversing system and monitoring for fault conditions of external entrapment devices
• 2018 UL325 requirement is that At least two external monitored entrapment protection devices are required prior to gate movement
• Resistive edge will be packed into the operator
• Expansion board has to IC2 ports on the board now
• Security + 2.0 radio technology radio receiver
• Receiver stores up to 50 remotes, compatible with HomeLink version 4 or higher
• Solar capable
• 7 segment LED diagnostic display
• Stores up to 20 error codes in history
• MyQ®-Enabled with the purchase of a 828LM LiftMaster® Internet Gateway
• Wireless primary secondary
• Built-in surge protection
• DC operator system
• Slow start/ stop
• External obstruction sensing
• Easy to read control inputs
• Adjustable timer to close
• LED indicators on all inputs
• Electronic programmable limits
• Keyed manual release
• Battery-backup

Note: Only LiftMaster Monitored Photo Eyes or Edge Sensors may be used with this operator to meet the 2016 UL325 Standard for momentary contact control (B1, B2)