DKS DoorKing 9240-381 Slde Gte Oper 3HP 230V 3P #80 Chain

DKS DoorKing 9240-381 Slide Gate Opener 3HP 230V 3P #80 Chain. DKS 9200 Series Operators are designed for maximum security applications only – such as industrial locations, loading docks, factories, airport security areas, sea ports, etc. 

• Maximum gate length 75-feet.
• Maximum gate weight 8000 Lb., #80 chain*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware.  Other external factors may affect the performance of the gate operator.)
• Adjustable solid state speed control, 1/2 to 2 Ft./sec.
• Slow start / slow stop function.
• 30:1 gear reduction running in a continuous oil bath.
• 3 HP continuous-duty motor.
• 208, 230, 460 VAC three-phase.
• Operator is shipped with chain brackets and 20-feet of #80 chain.
• Class III and IV applications only.
• ETL Listed.  (Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or B2 entrapment protection devices are required to be installed with this gate operator.)

  Mechanical

  • Direct driven limit nuts.
  • Anti-tailgating feature.
  • Adjustable mid-stop.
  • Gate tracker reporting output.
  • Ports for plug-in loop detectors.
  • Two convenience outlets.
  • Fail-secure operation includes crank for manual operation.
  • Programming switches.
  • Built-in reset switch.
  • Built-in power On/Off switch.

    Options

    • Chain Tray Kit (p/n 2601-270) is available in 10 ft lengths and is recommended on gates exceeding 20 ft in length
    • Red / Green Traffic Signal provides a visual indication when it is OK for traffic to proceed
    • This Vehicular Slide Gate Operator is designed for Class III and IV applications only and should never be used in applications serving the general public such as apartment complexes, gated communities, residential applications, parking garages, etc. Operator requires Type B1 and/or Type B2 entrapment protection in each direction of travel, otherwise the operator will not run.