latest 5 stars 5 stars icon

trusted store icon

DKS DoorKing 9230-380 3 Hp Slide Gate Operator

$7,940.00

(2) MONITORED SAFETY DEVICES REQUIRED

The 9230-380 connects to 208VAC, includes a three phase, 3 Hp motor - 5000 lbs. max. weight / 100 ft. max. width. Pad mount. Includes 20 feet of #60 chain. The 9230-381 connects to 230VAC, includes a three phase, 3 Hp motor - 5000 lbs. max. weight / 100 ft. max. width. Pad mount. Includes 20 feet of #60 chain.

Availability: In stock

DoorKing's Maximum Security operators are designed to operate vehicular slide gates in limited (Class III) and restricted (Class IV) applications only. Features include direct driven limit nuts, anti-tailgating feature, adjustable mid-stop, gate tracker reporting output, ports for plug-in loop detectors, two convenience outlets, fail-secure operation includes crank for manual operation, adjustable solid state speed control, 1/2 to 2 Ft./sec., slow start / slow stop function, programming switches, built-in reset switch, and a built-in power On/Off switch. Maximum gate length 100 feet, maximum gate weight 5000 pounds, a 40:1 gear reduction running in a continuous oil bath, and a 208 VAC 3 HP continuous-duty motor. Warranty: 5 years limited.

 SAFETY: THIS VEHICULAR SLID GATE OPERATOR IS DESIGNED FOR CLASS III AND IV APPLICATIONS ONLY AND SHOULD NEVER BE USED IN APPLICATIONS SERVING THE GENERAL PUBLIC SUCH AS APARTMENT COMPLEXES, GATED COMMUNITIES, RESIDENTIAL APPLICATIONS, PARKING GARAGES, ETC. REQUIRES TYPE B1 AND/OR TYPE B2 ENTRAPMENT PROTECTION IN EACH DIRECTION OFR TRAVEL, OTHERWISE OPERATOR WILL NOT RUN.

  • Maximum gate length 75-feet.
  • Maximum gate weight 5000 Lb., #60 chain*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware.  Other external factors may affect the performance of the gate operator.)
  • Adjustable solid state speed control, 1/2 to 2 Ft./sec.
  • Slow start / slow stop function.
  • 30:1 gear reduction running in a continuous oil bath.
  • 3 HP continuous-duty motor.
  • 208, 230, 460 VAC three-phase.
  • Operator is shipped with chain brackets and 20 feet of #60 chain.
  • Class III and IV applications only.
  • ETL Listed.  (Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or B2 entrapment protection devices are required to be installed with this gate operator.  
    OPTIONS
    • Heavy-Duty Mounting Pedestal is recommended for gates weighing over 1500 lb and is required if Chain Tray is used (models: 9210, 9220)
    • Chain Tray Kit (p/n 2601-270) is available in 10 ft lengths and is recommended on gates exceeding 20 ft in length
    • Red / Green Traffic Signal provides a visual indication when it is OK for traffic to proceed                                                                                                                                                                                                                                         

Reviews