DKS DoorKing 9210-563 VF Drive Brake 15-30HP

DKS DoorKing 9210-563 VF Drive Brake 15-30HP. DKS 9200 Series Operators are designed for maximum security applications only.

• Maximum gate length 100-feet.
• Maximum gate weight 2000 Lb. (#50 chain) / 3000 Lb. (#60 chain). Assumes gate is on level ground, in good condition with properly adjusted hardware.  Other external factors may affect the performance of the gate operator.
• Set speed 1 Ft./sec.
• 40:1 gear reduction running in a continuous oil bath.
• 1 HP continuous-duty motor.
• 115, 208, 230 VAC single-phase, 208, 230, 460 VAC three-phase.
• Operator is shipped with chain brackets and 20-feet of #60 chain.
• Class III and IV applications only.
• ETL Listed.  (Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or Type B2 entrapment protection devices are required to be installed with this gate operator.)
• Heavy-Duty Mounting Pedestal is recommended for gates weighing over 1500 lb and is required if Chain Tray is used (models: 9210, 9220)
• Chain Tray Kit (p/n 2601-270) is available in 10 ft lengths and is recommended on gates exceeding 20 ft in length
• Red / Green Traffic Signal provides a visual indication when it is OK for traffic to proceed
• This Vehicular Slide Gate Operator is designed for Class III and IV applications only and should never be used in applications serving the general public such as apartment complexes, gated communities, residential applications, parking garages, etc.
• Operator requires Type B1 and/or Type B2 entrapment protection in each direction of travel, otherwise the operator will not run.