DKS DoorKing 9150-386 1/2 Hp Slide Gate Operator, Poly Cover

DKS DoorKing 9150-386 Slide Gate Operator 1/2 HP Poly Cover. Includes 8060-082 RF kit.

• Maximum gate length 30-feet.
• Maximum gate weight 1000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware.  Other external factors may affect the performance of the gate operator.  If DC Convenience Open option is installed, maximum gate weight is 800 pounds.  Other external factors may affect the performance of the gate operator.)
• 1/2 HP continuous-duty motor.
• 115, 208*, 230*, 460* VAC  (*208, 230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
• Operator is shipped with chain brackets and 20-feet of #40 chain.
• Class I, II, III and IV applications.
• Compliant with UL 325 and 991.  ETL listed.  (Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or Type B2 entrapment protection devices are required to be installed with this gate operator.) 

• Self-Adjusting Magnetic Limits
• Built-in clutch
• Plug-in Loop Detector Ports
• Built-in power and reset switches
• Two 115 VAC convenience outlets
• Fail-Safe Configuration 
• G90 Galvanized steel frame
• Steel or Polypropylene (Poly) cover
• 20-Feet (6 m) #40 Nickel Plated Chain
• Gate tracker data output
• Selectable stop/ reverse function
• Partial open / anti-tailgate feature 
• Dimensions: 15.25″W x 24.50″H x 16.75″D
  Shipping weight approximately 125-185 lb (68-84 kg)