DKS DoorKing 6555-381 Swing Gate Oper 1HP 230V Variable Speed

DKS DoorKing 6555-381 Swing Gate Oper 1HP 230V Variable Speed. The 6500 Series Operators are designed to operate Vehicular Swing Gates in residential, commercial and industrial applications for both single and bi-parting gates. The Operator swings gates 90 degrees in approximately 12-14 seconds.

• Maximum gate width 18-ft. (1/2 HP) or 22-ft. (1 HP).
• Maximum gate weight 700 pounds* (1/2 HP) or 800 pounds* (1 HP).  (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
• 1/2 or 1 HP continuous-duty motor.
• 115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
• Class I, II, III and IV applications.
• Primary reduction is provided by a pulley / belt driving a 60:1 worm gear reduction system running in a continuous oil bath
• The 6500 rotates the gate 90° in approximately 12-14 seconds
• Operator mechanics are mounted on a steel frame plated for corrosion resistance
• Two-piece articulating arm mechanical slow-start / slow-stop function
• Mounting: operator requires a concrete mounting pad
• Keyed access is provided to release arm for manual gate operation in the event of a power outage
  Split polypropylene housing simplifies installation and maintenance.
• Unique breakaway hub helps to protect the gear box if the gate is rammed
• Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or Type B2 entrapment protection devices are required to be installed with this gate operator.)
• Adjustable, no maintenance magnetic limits.
• Overlap feature for bi-parting swing gate operation.
• Simple connection for secondary operator in bi-parting applications.
• Selectable shadow/reverse loop function.
• Magnetic lock power provided.
• Gate tracker reporting output.
• Programming switches.
• Built-in reset switch.
• Built-in power On/Off switch.
• Adjustable electronic magnetic limits
• Auto-close timer (1-23 seconds)
• Gate overlap feature for bi-parting (dual) gate operation
• Built-in On / Off switch
• Built-in alarm reset switch
• Ports for plug-in open and reverse loop detectors (DKS plug-in detectors only)
• Three 115 VAC convenience outlets for accessory transformers

• Dimensions:
  18.38″W x 31.63″H x 23.25″D

  Shipping weight approximately:

  175-225 lb (79-102 kg)
  depending on model and options selected