DKS DoorKing 1603-380 Gate Operator (Arm, Spikes excluded)


1/2 HP, 115 V (5.7A)

Warning sign and/or traffic signal MUST be used with this operator

Availability: In stock
  • Magnetic limit control.
  • Ports for plug-in loop detectors.
  • Automatic sequencing inputs for use with slide and swing gate operators.
  • Up input memory buffer.
  • Down memory option.
  • Multiple up commands.
  • Two convenience outlets.
  • Gate tracker reporting output.
  • Programming switches.
  • Built-in power On/Off switch.
  • Left or right-hand mount.
  • 1/2 HP continuous-duty motor.
  • 115, 230°, 460° VAC.   (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
  • 40:1 gear-box running in a continuous oil bath.
  • Arm rotates 90° in approximately 2.5 seconds.
  • Class II, III and IV applications.
  • Compliant with UL 325 and 991. 
  • (Note: To be compliant with UL 325 and industry safety guidelines, entrapment protection devices need to be installed with this gate operator.
  • Dimensions: 15.25"W x 43.5"H x 15.5"D.
Spike Components:
  • Maximum 20,000 Lb. per axle weight limit.
  • Tunnel sections surface mount: 31"W x 3"H x 24 or 36"L
  • Spike sections surface mount: 31"W x 3"H x 36"L
  • End Cap: 31"W x 3"H x 12.25"L


CAUTION: Installation and use of traffic control spike units in areas that are subject to freezing weather with the potential of snow and ice accumulation IS NOT RECOMMENDED.  The units can freeze in the up position and cause unintended damage or injury due to the inability of the spikes to retract.

Maximum 20,000 Lb. per axle weight limit on spike sections.

More Information
Motor Size 1/2 Hp
Manufacturer DKS DoorKing
Write Your Own Review
You're reviewing:DKS DoorKing 1603-380 Gate Operator (Arm, Spikes excluded)
Your Rating