BEA 10PHOENIXEX-IT100 Explosion Proof Motion Sensor

BEA’s PHOENIX EX^TM Family combines a microwave motion detection sensor in an explosion-proof / flame-proof housing, which is ideal for use in unique environments such as chemical manufacturing, petroleum refining and military facilities.

The PHOENIX EX^TM Family is designed to detect within a desired area for security or intrusion detection, warning indication and automation. When tied into a security system, the PHOENIX EX^TM Family offers a monitoring feature via end-of-line resistors. These resistors provide unique output states, which allow differentiation between an motion detection signal and/or an interruption in functionality due to tampering of the device.

The explosion-proof / flame-proof housing is a waterproof-rated enclosure designed as an IP66 housing. This housing achieves UL Class I, Div. 1, Groups B, C, D; Class II, Div. 1 & 2, Groups E, F, G; and Class III

TECHNOLOGY - Microwave Doppler Radar
TRANSMITTER FREQUENCY - 24.150 GHz
TRANSMITTER RADIATED - < 20 dBm EIRP
TRANSMITTER POWER DENSITY - < 5 mW / cm2

DETECTION MODE:
Motion

OUTPUT - Relay (free of potential change-over contact)
MAXIMUM CONTACT VOLTAGE - 42 VAC / VDC
MAXIMUM CONTACT CURRENT - 1 A (resistive)
MAXIMUM SWITCHING POWER -30 W (DC); 60 VA (AC)

ANTI-TAMPER FEATURE:
PHOENIX EX -
1) product anti-tamper (magnetic switch within cover, alerts when cover is unscrewed)
2) application-based anti-tamper (tamper alert via end-of-line resistor)

PHOENIX EX-IT - Tamper alert via output

MINIMUM DETECTION SPEED:
2 in / s*

SUPPLY VOLTAGE:
12 – 24 VAC; ±10% (50 – 60 Hz)
12 – 24 VDC; 30% / −10%

MAINS FREQUENCY:
50 – 60 Hz

MAXIMUM POWER CONSUMPTION:
< 2 W

ELECTRICAL ACCESS:
¾”

CABLE LENGTH:
30’ or 100’ (default), diameter ¼” max.

DETECTION ZONE:
STANDARD MOUNTING - 13’ × 16’ @ 16’
LOW MOUNTING - 13’ × 16 ½’ @ 8 1⁄5’
WIDE DETECTION - 30’ × 11’ @ 21’
Typical at 30° and field size 9

MOUNTING HEIGHT:
STANDARD MOUNTING - 11 ½ – 23’
LOW MOUNTING - 6 ½ – 11 ½’
WIDE DETECTION - 11 ½ – 21’

DIMENSIONS (HOUSING & BRACKET):
5 ½” (H) × 7 ½” (W) × 9” (L)

WEIGHT:
10 lbs

TEMPERATURE RANGE:
-22 – 140 °F

NORM CONFORMITY:
EMC: 2004 / 108 / EC
R&TTE: 1999 / 5 / EC